Does your Kawasaki KRX 1000 suffer from fractured door syndrome? Has it pinched your arm yet? Do you just hate the way your doors look with the top of them popped opened?
Well we've got the fix!
We developed a door cap that will hold your inner and outer door plastics together and look great doing it.
**Door caps only come in a dark grey color, the ones pictured are lighter than what the production version will be.**
This kit come with 2 door caps 1-driver side and 1- passenger side 10-push darts
Install is easy and only takes about 10-15 minutes and all you need is a drill and a 5/16" drill bit.
1-Pinch the top of the door back together, use tape to hold them shut if needed
2-Line up the inner rear corner of the door cap with the rear edge of the door, maker sure the cap is seated on the top of the door and drill through the inner door panel using the cap as a guide, start with the hole closest to the rear of the door.
3-Once you drill the first hole insert a push dart but do not depress the center yet, work your way to the front of the door drilling one hole at a time and inserting a dart then moving to the next hole
4-Remove all darts, remove door cap, wipe away any drill debris, them reinstall cap, install push darts, depress the center pin of the push darts now.
5-Repeat on the other side of your car
Note: The door caps are made form a polyurethane material, this allows them to be flexible but rigid at the same time. The door caps twist slightly when they come out of the mold, this is normal and they easily take proper shape when installed. Just make sure you hold them tight to the top of the door when installing.
**Door caps only come in a dark grey color, the ones pictured are lighter than what the production version will be.