Kawasaki KRX4 Rear Door Caps
They are finally here! Thank you for your patience and sorry for the delay!
These rear door caps complete the look for your KRX 4 seat while holding the inner and outer door plastics together.
Just need the front door caps? Click here.
**Front Door caps will be back in stock 5/1, click 'Notify me when back in stock' to get an email or text when we receive them. Thank you!
This kit come with 2 door caps 1-driver side and 1- passenger side and push darts.
Install is easy and only takes about 10-15 minutes and all you need is a drill and a 5/16" drill bit.
1-Pinch the top of the door back together, use tape to hold them shut if needed
2-Line up the inner rear corner of the door cap with the rear edge of the door, maker sure the cap is seated on the top of the door and drill through the inner door panel using the cap as a guide, start with the hole closest to the rear of the door.
3-Once you drill the first hole insert a push dart but do not depress the center yet, work your way to the front of the door drilling one hole at a time and inserting a dart then moving to the next hole
4-Remove all darts, remove door cap, wipe away any drill debris, them reinstall cap, install push darts, depress the center pin of the push darts now.
5-Repeat on the other side of your car
Make sure you hold them tight to the top of the door when installing.
Door caps only available in BLACK.
**Due to the manufacturing process, some pieces may have small surface imperfections and dimpling. We have worked tirelessly to fix this issue while keeping the pricing affordable. We apologize for the delay and appreciate your patience. If you are unhappy with the product, please contact us for a refund.